Category Archives: Handmade by Stickelberry

Handmade by yours truly

DIY Cloth Napkin Clutch

DIY Cloth Napkin Clutch

If you’ve been following me for a while, you KNOW I can’t pass up pretty fabric… even if it’s not really meant to be sewing fabric. But, pretty colors and patterns and textures are abundant these days in so many basic items that us creatives find inspiration everywhere, right? Yep.

So here we go with another gorgeous Target find!

DIY Cloth Napkin Clutch

These napkins have the most gorgeous print ever and I couldn’t pass them up. I recently got around to using ONE of them to make a super cute clutch that I gifted to my son’s awesome teacher, and I’m giddy to think that I still have THREE napkins left to play with — YAY!

Oh and by the way, whilst visiting my store the other day I noticed that they now have the matching placemats too…so you could also make a clutch like this one here!

Supplies:

  • 2 Cloth napkins – mine are about 19.5″ square
  • Interfacing – I used a stiff one, cut to 9×19″
  • Ribbon or bias tape – mine was cut to 29″ but it depends on how you want to use it. If you want the decorative detail like mine that runs up and down the whole clutch, cut it to 29″ — if you just want it to tie off the button, cut it to 13″
  • A great button – in my opinion, the bigger the better!
  • Pins, thread, scissors…
  1. Fold napkin in half, insert your ribbon or bias-tape in between the two layers and pin it closed. I put the open end of the bias-tape facing out, and left a long 10″ tail. I did this just for appearance, there is no value other than it’s a cute detail. You can leave this part out if you want and just sew the two edges of the napkin together without the ribbon/bias-tape, but you’ll need to shorter piece of ribbon for the closure.
    DIY Cloth Napkin Clutch

    Fold napkin in half, insert ribbon/bias-tape if using, and pin closed

    DIY Cloth Napkin Clutch

    Fabric sandwich – napkin edge, bias-tape, napkin edge

    DIY Cloth Napkin Clutch

    Leave a long tail – mine was 10″

  2. Sew down the length of the pinned edge, going back and forth a few times at each end to tie off the thread. Be sure you’re catching the ribbon/bias-tape in your stitch if you’re using it, and continue to sew all the way down it’s length or it will open up on you.

    DIY Cloth Napkin Clutch

    If using bias-tape sew all the way down the length of the tail

  3. Open your new tube of a napkin and lay it out so that the seam you just made is in the center — you can press the fabric to keep it steady.
    DIY Cloth Napkin Clutch

    Open the new napkin tube and shift it to lay flat with the seam in the center

    DIY Cloth Napkin Clutch

    Seam in center of new napkin tube

    DIY Cloth Napkin Clutch

    I just love this detail!

  4. Insert your interfacing! It should fit nicely in between the two layers of fabric. Go press again, following the instructions of the interfacing (or not, whatever – you’re going to sew it in place and it’s just for structure).

    DIY Cloth Napkin Clutch

    Insert interfacing

  5. Sew along the bottom edge, sewing the tube shut, catching the interfacing in your stitch.

    DIY Cloth Napkin Clutch

    Sew along bottom edge, making sure to catch the interfacing

  6. Sew along the top as well — BUT if you’re using a short piece of ribbon or bias-tape, this is where you’ll insert it in the center of the edge and sew it in place. If you did it like mine, it will already be there and you’ll need to either sew over the top of it or sew up to the sides of it depending on your preference.

    DIY Cloth Napkin Clutch

    Sew along the top edge – add ribbon if you haven’t already

  7. Now fold your clutch. Place it face down (ribbon/bias-tape detail down) and fold up from the bottom to where you like it, pin in place, and then fold the top down. You can play with it a bit to get the right spot. Once you have it, PRESS!

    DIY Cloth Napkin Clutch

    Lay detail face down,Fold and pin the bottom half up

  8. Take the clutch back to the machine, lift up the top flap and sew up the bottom side edges just to where the pocket fabric ends. Be sure to go back and forth a few times to ecure and close the stitch.

    DIY Cloth Napkin Clutch

    Sew up the bottom side edges

  9. Now hand-sew your button on the bottom portion of the clutch. Tie a knot in your bias-tape or ribbon, or seal it with some fray check.

    DIY Cloth Napkin Clutch

    Sew on button, knot the tail

  10. Ta Daaaaaaa! DIY Cloth Napkin Clutch
  11. ***I later went back and added some decorative stitching in another color thread just for fun, but didn’t get a good picture of it (of course) — you can kind of see it here, I did it on the top and bottom edges. DIY Cloth Napkin Clutch

Affiliate Disclaimer: You know how much I love Target – that’s WHY I am an affiliate, I’m happy to promote their awesome stuff. If you buy anything online using my links, I’ll get a few pennies! πŸ˜‰

Share This! Facebooktwittergoogle_plusredditpinterestlinkedintumblrmail
DIY Nursery Mobile

DIY Paper Nursery Mobile

An affordable and easy project for baby’s room!

What would Baby #2’s room be without some crafty goodness from Mama? Due in early May, I have less than 10 weeks to go, so the pressure is ON! I have to get his room ready for him so it’s nice and cute and Stickelberry-like.

IMG_6734

I made a mobile for Logan’s room the last time I was pregnant following this tutorial here that I found in Parents magazine, and while it did turn out cute, I found the process very awkward and had to re-do it several times to get it to hang right. Even still to this day the center hoop is off center and the whole thing is just slightly imbalanced. That bugs. The strands also fell off several times (thank goodness I didn’t hang it above the crib), so I ultimately re-attached each one using thick sticky dots. Here is a picture of Logan’s mobile – his room theme is Sock Monkeys!

So, I decided to come up with my own plan… for Baby #2’s room, the theme is a little more contemporary and simple, so I wanted a simplified mobile. Fewer stands, fewer circles…

Simplified Mobile

Simplified Mobile

I hit my local Michaels for the supplies and decided that instead of using the embroidery hoops, I would use a squared wooden dowel — well, two dowels, criss-crossed (I cut a long one in half).

Squared Wooden Dowel..err...Stick?

Squared Wooden Dowel..err…Stick?

I picked out the paper I wanted to use in my nursery room’s colors (White, Grey, Navy, Orange), and some jump rings and went home and got to work. Since I do have a decent selection of craft tools and had made one of these mobiles before, I already had some of the other basic supplies: 2″ hole punch, keychain ring, thin wire, exacto knife, thread, mini pliers.

Supplies

Supplies

Of course I had to throw in some bling — I just adore the silver glittered checkerboard card stock I found in the scrapbook paper aisle! The Navy has a nice sheen to it too – it’s quite beautiful.

Paper and Card stock in Baby's Color Scheme

Paper and Card stock in Baby’s Color Scheme

I started typing up a summary of how I made this ting, but it was a little wordy…. so it’s better to explain with pictures! πŸ™‚

I hope baby likes it!

DIY: Paper Mobile Tutorial

Supplies:IMG_6691

  • Scrapbook Paper or Card stock — I used 1 12×12 piece for each color except the orange scrapbook paper and the silver glittery card stock. I used 2 pieces for those because they are not double sided. Depending on the colors/paper you choose, plan accordingly as you’ll need to punch out extra circles and glue them to the backs of the ones that aren’t double sided.IMG_6731
  • Jump Rings — found in the jewelry aisle. Mine are 9mm and came in a package of 85 pieces. I have many leftover but I couldn’t find a smaller package.
  • 1 Key Chain Ring — also in the jewelry aisle. I had a pack of them from other projects.
  • Tape Runner– I used my favorite one, Elmers! You could also use regular glue, sticky dots or your other paper adhesive of choice.
  • 36″ Squared wooden dowel/stick — these come in a variety of sizes. Choose one that suits your style!IMG_6694
  • Thin Wire, Thread, Yarn, Shoelace… whatever you want to use to attached the dowels together, attach the strands to the dowels, and to hang from the center. This isn’t an exact science – be creative and use what works for you!
  • Tools — 2″ hole punch, Exacto knife, pliers, hole punch (mine is 1/8″); again you don’t have to use the EXACT same tools as I do!

I measured the dowel and marked the halfway point (18″), then measured and marked where I wanted to hang the strands (every 3″), marking an ‘x’ where the two dowels would cross each other.

IMG_6688

IMG_6687

Measure out where you will cut the dowel, where the two pieces will cross, and where you will hang the strands

I used the exacto knife to cut the dowel (the wood is very thin and pliable).

IMG_6692

Nice, clean cut from the exacto knife

Nice, clean cut from the exacto knife

I then used the exacto knife to notch out the center of the dowels where they would cross so they fit together like a puzzle piece.

IMG_6698IMG_6700I made a groove at each marking for the strands as well so that the wire I used to secure them would sit nicely and not move.

IMG_6696Next, I put the dowels together and used a piece of the wire to secure the two pieces …my piece was about 8″.IMG_6701

Dowel pieces secured using notch and wire.

Dowel pieces secured using notch and wire.

Now on to the fun part — punching circles!

Punch Therapy

Punch Therapy

Woops – be careful not to do this πŸ™‚IMG_6737

*ONE IMPORTANT NOTE: If you use scrapbook paper or single-sided card stock, depending on your color scheme or preference, you may want to punch two circles for each one that isn’t double sided — otherwise it will be white. That may or may not matter to you… it did to me so I used a tape runner (Elmer’s is my favorite) to glue two circles together for the orange and silver circles.

 

Glue two circles together to make them double sided if needed

Glue two circles together to make them double sided if needed

Once you have all your circles punched out, play around with your pattern or sequence for your strands. You can have them all the same (important if you’re doing a rainbow or ombre theme!), but I decided to have one dowel with one pattern, and the other with a different pattern, so it was mixed up a little.

IMG_6716 IMG_6717

 

 

 

 

 

 

 

And now for some more fun… punching holes!

More Punch Therapy

More Punch Therapy

My hole punch is 1/8″ – you can use whatever size you like, but make sure not to go too far in to the circle, otherwise your jump ring won’t have enough room. I went in about 1/8″ from each end of the circle. IMG_6730Have I mentioned I LOVE anything that glitters?

So pretty...

So pretty…

*CRAFT BONUS: Confetti!IMG_6727

Now comes the labor intensive part. Attaching the jump rings. It isn’t difficult, it just takes time. You can use pliers if you need to, but I found it was quicker and easier to just use my fingers – I found the jump rings pretty easy to bend and put that together.

IMG_6735Link up all of your strands – be sure to put one at the very top of each strand, and no need to put one at the bottom!

IMG_6733

All linked up

Now, to attach the strands to the mobile – cut a piece of wire for each strand. I cut mine about 1/2″ in length.

IMG_6739Next, simply loop the wire through the top jump ring, and wrap it around the dowel, nesting it into the groove that you carved for it earlier. Repeat for each strand.

IMG_6742

Loop the wire through the jump ring and wrap it around the dowel

Loop the wire through the jump ring and wrap it around the dowel, nesting it into the groove

Almost finished! This part I forgot to take a picture of (sorry!) but you can see how it is put together in the next picture…

IMG_6780Take the keychain ring and connect it to the crossed wire in the center of the two dowels. Then connect a jump ring to the keychain ring, so you have the dowels hanging from the two rings. Take your string or ribbon or fishing line or shoelace (whatever you’re using) and loop it through the jump ring. This will allow your mobile to spin nicely and keep it from turning lopsided.

IMG_6779

Connect keychain ring to crossed wire, then connect a jump ring to the keychain ring and loop your hanging material of choice through it

I tied my string in a knot and hung it from one of these bad boys..IMG_6764And here it is, hanging in the nursery (to be revealed later!)

Finished!

Finished!

That’s it! Not too bad, right? Definitely worth the effort for a super cute homemade mobile for your little one..

XOXO, D

 

Share This! Facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

Cowgirls That Drool

I received a custom order recently for a western themed girl gift. After brainstorming we came up with a ruffle skirted onesie, a bandana shaped bib and a headband to match!

I think they came out pretty cute — the onesie looks like a little dress since I made the ruffle extra long. All she needs are some pink cowgirl boots and she’ll be ready for the rodeo!

I may just have to make another set with my extra fabric and take some pictures for a tutorial — the onesie was a lot easier than you would expect, and I just altered my bib pattern slightly to get the pointy bib look. Stay tuned!

20131018-163716.jpg

Share This! Facebooktwittergoogle_plusredditpinterestlinkedintumblrmail