Why buy a scarf when you can make one yourself in about 15 minutes? It is really that easy. You can use any type of fabric you like, make it as long or loopy as you like and add whatever embellishments you like. Sew much fun.
This tutorial is for an infinity scarf – you know, the circle ones you wear like a necklace? And this method creates a nice, finished tube — no exposed ends. In my example, the fabric I used measured 18×28″ and makes one loop, perfect for a simple accessory. If you want it to hang low, add length. If you want to wrap it around a few times and make a big, bold scarfy statement, add even more length (double or triple or quadruple!).
A Note on Fabric: Knits work best for scarves since they are stretchy and drape nicely. You can also use fancy fabrics, chiffon, etc., but they will not stretch so be mindful of that (you do need to get it over your head, you know). Regular cotton can work as well, but it is stiff (also does not stretch), and gives your scarf a totally different look. So if you want it to hang nicely, go with a knit or something lightweight and drapey. Is that a word? 🙂
The fabric I used in the tutorial is Modern Jersey from Spoonflower — it’s one of my designs, and I used only a fat quarter! They are generous with this fabric given that their fat quarter for it is 18×28″…bonus! It’s a lovely weight as well – thick, but very soft and stretchy – I absolutely love it.
A Note on Needles: If you are going to use a knit fabric, CHANGE YOUR NEEDLE. Yes, there are different needles for different types of fabric. You may not think you need to use a different needle, or you may be afraid to try to change it, but it is worth it! Trust me. It takes only a second and makes a world of difference. Just refer to your manual for instructions and make sure the flat side of the needle faces the back when you shove it in. If you need some ball point knit needles, here you go!
To make your scarf:
Start by laying out your fabric right side up. Fold in half lengthwise, right sides together, and pin in place.
Take your tube to the sewing machine and simply zigzag stitch all the way down the end of the tube to sew it together.
The zigzag stitch will allow for stretching the fabric without breaking the threads.
Now reach inside to the other end and pull it through. Don’t turn it all the way right side out, just pull it towards you so you can line up the the two tube ends, one inside the other, the right sides of the fabric facing each other.
Pin around the edges to hold them together if you need (most of the time I don’t need to pin, just depends on the fabric).
If your machine has an end that comes off like mine, you’re in luck – this will be super simple.
Start to sew the edges together – I always start where the seams line up. Just turn the fabric as you sew, going all the way around, but STOPPING about 2 inches before the end (or the start, since it is where you started).
–> If your machine end doesn’t come off, that’s OK! Just work with the fabric and sew around as far as you can – you’ll have more than a 2″ gap, but that’s perfectly OK.
Reach inside and turn your scarf right side out — it will all come out, don’t worry. You’ll have a nice circle tube with a hole in it.
Now you have two options —- hand stitch the hole closed (a ladder stitch would be great here), OR fold the edges in, pin and sew it shut on your machine. I use my machine. Everytime.
You’ll have a small seam but that part goes underneath and sits on the back of your neck anyway — just turn it around.
And you’re done. Applaud yourself and wear your new scarf with pride, my crafty friend!